Purpose: View some basic troubleshooting steps that you can follow if you are having issues printing labels on your Mac operating system.
Printer Communication Issues
If the printer is not being recognized, please try the following:
- Connection - make sure that the USB cable is firmly connected to the printer and/or try with another USB cable. In case you are using a print server or the printer is being shared from another computer in your local network, please test the printer by connecting it directly to your computer.
- Status Light Indicator - Make sure that there is power to the printer and check if the power LED indicator turns on. If the power LED indicator does not turn on, it might be that the power adapter is not supplying power to the printer.
You can check the status of the printer in the settings of your OS X by following these steps:
- Go to System Preferences
- Click on Printers & Scanners
- You will see the name/model of the printer and the status. The statuses can be offline or idle.
- Additionally, you can also check the status of the printer if you print a document. You will notice that a printer icon will appear on the dock, this icon will indicate the status of the printer as well:
Note: If you are not able to get the printer online after checking the steps suggested above, kindly contact the manufacturer of the printer for assistance because the printer might be defective.
Labels not printing
If you are printing a label and the printer is not responding, then the issue might be related to a bad output data or the printer is not receiving the order accordingly. Kindly check the following:
- Not responding errors - is there any error message/code? If the error message makes mention of Sendcloud or our Print Client App, make a screenshot of the error message/code and contact us at firstname.lastname@example.org for further assistance. If the error message is not related to Sendcloud, please contact the manufacturer of the printer for support.
- Status Light indicator - The status of the LED indicator provides the current status of the printer and will help you to identify and correct problems. In some cases the light indicator can be blinking or static in red, blue or orange. Please check the user manual of the printer or contact the manufacturer for further assistance.
- Self-test printing - In some printer models/brands, it is possible to perform a self-test. By performing this test you can isolate the issues related to communication or printing quality, kindly check the user manual of the printer to see if you have this option available.
Print quality issues
If the label is not being printed in the correct format, make sure you are selecting the A6 format in the Printer Settings section in your Sendcloud panel and in the advanced printer settings on your Mac as well.
A6 measurements are 105 × 148 millimeters or 4.13 × 5.83 inches (4x6)
Selecting A6 in SendCloud panel:
In order to check the advanced printing setting on your Mac, check this link.
Tip: Printing Labels in One Click
You can also print labels in one click to avoid downloading the label in pdf format. If you print the label using our Print Client App, you are getting the best quality as possible instead of generating the pdf. The steps to install our Print Client App can be found here.
Labels are blurry or faded
Make sure that there is no dust inside the printer, check the official manufacturer’s site for advice on how to clean the label printer. Try to print any other document or a test page to see if the issue occurs regardless of the document that is being printed.
Bars (in barcode) are very thick
Adjust the print speed and darkness in the settings of the printer, kindly check the user manual of the printer to know more about these adjustments. For some models/brands you will need to perform these adjustments via CUPS (The Common Unix Printing System). This is a web interface that will allow you to make some adjustments that are not shown in the Advanced Printing Preference on your Mac. Please contact the manufacturer of the printer for further assistance in case it is needed.
How to access the options for your printer
- The steps to access to CUPS web interface for Zebra printer are provided here.
- A non-official link for Dymo printers can be found here.
Paper Format: inch and portrait
Size: Width 4,00 and Height 6,00
Set the paper size to '1744907 4 in x 6 in'
*Please note we have only tested the models mentioned above.
For help setting up your DYMO printer on Mac, please see this article.
Strange characters when printing
Try to connect the printer using another usb cable, make sure you have installed the latest driver and firmware version available for the model of your label printer. Please note that some manufacturers advise to turn off and disconnect the printer from the computer during a (re)installation. You can also check if the issue persists when you connect the printer to another computer.
Still need support?
If you are still having issues connecting your printer or printing labels, we advise that you confirm with the manufacturer of your specific printer brand that the printer is working as intended, and that you have installed the latest version of any available drivers.
For more assistance troubleshooting your settings, once the above information has been checked, contact us by opening a support ticket in your Sendcloud Platform and include the following information:
- Printer model
- Operating system
- What did you change recently on your computer or environment? E.g. Operating system updates, 3rd party printing programs installed, new hardware or roll labels.
- Environment: Local / print server / Shared on local network
- Issue description: (kindly share screenshots of the error message and describe in details the steps or workflow you are doing so that we can reproduce the issue)
- Does the issue continue to occur if you quit the Print Client App? Yes/No
- Print client app version installed*:
*You can check the version of the Print Client App by clicking on the Sendcloud icon on the tool bar and selecting Open management interface. Kindly provide us with a screenshot of this when creating your support ticket.